Cooper Security 9853 Installation Guide download pdf (Page 36)

30 496791

3. Installation

• Each partition can be set, unset or in alarm independently of the other

partitions.

• You can assign individual keypads to one or more partitions. The

keypads cannot set or unset partitions to which they are not assigned.

• Each partition can have its own bell and strobe set output.

• Every zone belongs to one and only one partition.

When you apply power to a new control unit for the first time and then key in

the default engineer access code, the control unit asks if you wish to set up

as a single system or partitioned system (see step 6 on the previous page). If

you want to convert between single system and partitioned system at a later

date you must use command 98. This will also restore the control unit to

factory defaults.

For an overview of the programming steps required to set up a partitioned

system see "4. Programming - Partition Programming".

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 101 102

No comments

Cooper Security 9853 Installation Guide Page 36