Cooper Security i-on160EX User's Guide download pdf (Page 62)

4. Administration i-on160

Page 56

As you press the function keys

on the keypad the display

shows their name, for

example:

Tick Key

9. Press X to end the test.

TEST

Wired Keypad >

Walk test

The Walk Test menu allows you to test detectors without starting

an alarm.

To “walk test” an alarm system you operate each detector in the

system. If the detector is working the control unit sounds a

confirmation tone and flags that the detector has passed the test.

Simply walking past motion detectors should be enough to trigger

them, but you will have to open doors and windows if you want to

test any detectors attached to them.

Note that you cannot test wired PA wired buttons, Fire detectors,

and 24 hour zones during a walk test. The control unit will always

start an alarm if you activate those detectors. (A 24-hour zone

has detectors that are “live” all the time, not just when you set

the system.)

If you find a detector that does not work, call your installer.

To use the Walk Test menu:

1. Make sure the display shows

the standby screen.

i-on160EX

12:20 02/11/2010

2. Press .

Enter Access Code

( )

3. Key in your access code (or

present a tag).

Omit Zones >

4. Press n until you see:.

Test >

5. Press Y.

The bottom line of the display

shows:

TEST

Sirens & Sounders >

1 2 ... 57 58 59 60 61 62 63 64 65 66 67 ... 103 104

Comments to this Manuals

No comments

Cooper Security i-on160EX User's Guide Page 62

Comments to this Manuals

Related products and manuals for Security access control systems Cooper Security i-on160EX