Cooper Security Homelink 75 Installation Guide download pdf (Page 16)

Administration

Page 16

PA (Panic Alarms)

A PA is a two button telecommand, used to start a Panic

Alarm. To activate the transmitter you must press both

buttons at the same time. A third button acts as a lock so

that you can prevent the PA going off when carrying it in

your pocket.

After asking if you wish to learn a pendant, the control

unit gives you the opportunity to register a PA.

Note: While you are registering a new PA the control unit

will not respond to an alarm signal from any

pendant or PA it has already learned.

13. Squeeze both buttons on the PA.

When you squeeze the buttons the control unit

learns the identity of the PA and registers it to the

user.

If you do not wish to register a pendant press "NO

PA".

You cannot register more than one PA per user. If the

control unit has already learned that PA then you will

hear a low tone and the display remains unchanged,

asking you to press the buttons on the PA.

Editing Existing Users

If you wish to change the details for an existing user

then:

1. Enter the User Menu and select Users - Edit User

The display shows a list of the users already

programmed into the control unit, one user per

screenfull.

2. Press u or n to display the user you wish to edit,

and then press Select.

The display shows a list of the options that you can

edit. Use the u or n keys to see more options.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 31 32

No comments

Cooper Security Homelink 75 Installation Guide Page 16