Cooper Security Homelink 75 Installation Guide download pdf (Page 21)

Administration

Page 21

System Configuration

The System Configuration option allows you to set up

parts of the system to suit your particular needs. If you

need more extensive changes to the operation of the

system then you can select Menu - Call to Downloader to

connect your control unit to an installer's PC. Downloader

software on the PC provides more extensive

programming facilities.

Make sure the system is idle.

1. Enter the User Menu and select System Config.

The display shows the System Configuration menu.

2. Select the item you wish to configure.

Set Date and Time

When setting the date use u or n to adjust the day

number. Press NEXT to highlight the month. Again, use

u or n to adjust the month number. Press NEXT to

select the year and use u or n to adjust the year

number. Press NEXT to move on to setting the time.

When setting the time use u or n to adjust the hours.

Press NEXT to highlight the minutes and use u or n to

adjust the minutes. Press OK to store the new setting.

Outputs

The 7510r can control several radio output modules,

each of them capable of switching an attached electrical

device on or off on command.

The control unit operates a radio output module by

broadcasting a message every time it wants the module

to react. Each message contains the identity of the

control unit, a channel number, and an instruction to

either "Activate", "Deactivate" or "Toggle". Every radio

output module in range hears the broadcast. To make

sure that only selected modules respond the installer

makes them learn the identity of the control unit, and

which channel number they are supposed to respond to.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 31 32

No comments

Cooper Security Homelink 75 Installation Guide Page 21