Cooper Security Homelink 75 Installation Guide download pdf (Page 23)

Administration

Page 23

Re-Programming Telecommands for

Users

The System Config - Telecommands option allows you to

re-program buttons on a telecommand.

1. Enter the User Menu and select System Config -

Telecommands - Edit.

2. Press the button you want to reprogram on the

telecommand.

Note: If you do not have the telecommand press "NO

TELECOMMAND".

The display presents a list of the registered

telecommands and their users. Select the

telecommand you want to edit. Press

select the button you wish to re-program.

Once you have selected the button you wish to re-

program the display gives you the option of re-

programming the button to either set/unset some

part of the system, or to operate one of the

outputs. Select the option you wish to use from the

display.

Deleting Telecommands

If a user has lost a telecommand you should delete it

from the system to make sure that no unauthorised

person can use it to gain access. Also, if you wish to

reassign a device to another user, you must first delete it

from the system.

1. Enter the User Menu and select System Config.

2. Select Telecommand – Delete.

The display shows a message asking you to identify

the telecommand you wish to delete.

2. Press a button on the device that you wish to

delete.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 31 32

No comments

Cooper Security Homelink 75 Installation Guide Page 23