1. Introduction
Page 4 496930
1. Line Fault LED
2. Service LED
3. Power LED
4. Level setting
keys.
5. Omit key.
6 Enter Key
7 Fire alarm keys.
Press 7 and 9
together.
8. Medical
assistance keys.
Press 4 and 6
together.
9. Optional
programmable
panic alarm keys.
Press 1 and 3
together.
10. 16 digit Liquid
Crystal Display
(LCD).
1
4
Figure 1. 9930 LCD Remote Keypad.
The display shows the state of detector zones, the anti-tamper wiring, and
other information as necessary. In addition:
f Line Fault. Glows steadily if the connected telephone line is not
working correctly.
s Service. Glows steadily if the system needs attention from an
Engineer or Installer.
a Power. Glows steadily when mains power is present. Flashes if the
system is working off its stand-by battery.
The keys allow you to enter your access code to set and unset the system.
In addition, individual keys let you start or stop various functions. These are:
Key Used to:
A Set the system to Level A (Full Set).
B Set the system to Level B.
C Part set the system to Level C.
D Part set the system to Level D
4 Change the user access codes.
5 Display the last 250 log events.
“Proximity” Tag
Reader Area
Comments to this Manuals