4. Administration i-on40 & i-onEX Range
Page 104
11. Press .
The keypad gives a double
“beep” confirmation tone. The
keypad display shows:
The control unit has deleted
the remote from its memory.
The remote can no longer be
used on the system.
followed by:
12. Repeat steps 9 to 11 if you
wish to delete any other
remotes.
13. Press repeatedly to leave the
menu.
The control unit will let you delete all remote controls in one
operation. Think carefully before you use this feature.
To delete all remotes:
1. Make sure the display shows
the standby screen.
3. Key in your access code (or
present a tag).
4. Press until you see:.
6. Press until the display
shows:
8. Press until the display
shows:
Comments to this Manuals