i-on40 & i-onEX Range 3. Setting and Unsetting
Page 27
tone then there is a fault, for
example an active detector.
b. Leave by the designated exit
door.
Remember to close the door.
At the end of the exit time
the system sets.
(If your system is
programmed for silent set
then the keypads remain
silent unless a fault, such as
an open door, is present.)
Exit Terminate Button:
a. The keypad sounds the exit
tone. The top line of the
display shows the part of the
system being set, the bottom
line shows “Exit Terminate”.
b. Leave by the designated exit
door.
Remember to close the
door.
c. Press the Exit Terminate
Button.
Final Door Set:
a. The keypad sounds the exit
tone (an interrupted tone if
the final exit door is open, a
continuous tone if the exit
Comments to this Manuals