4. Administration i-on40 & i-onEX Range
Page 78
access, and “OFF” to deny it.
9. Press when you have
finished making changes.
The keypad gives a double
“beep” confirmation tone. The
keypad display shows:
Setting the Date and Time
You will need to re-program the date and time if the control unit
loses power for an extended time, and the battery is exhausted.
1. Make sure the display shows
the standby screen.
3. Key in your access code (or
present a tag).
4. Press until you see:.
5. Press .
The bottom line of the display
shows:
6. Press until the display
shows:
7. Press .
The top line of the display
shows “Set the date” and the
bottom line shows the current
date in number format
(day/month/year). The day is
highlighted.
8. Key in the correct date. Use
the format dd/mm/yyyy. If the
days or months are “9” or less
then key in a leading zero. For
Comments to this Manuals