Cooper Security i-on160EX User Manual download pdf (Page 39)

i-on40 & i-onEX Range 3. Setting and Unsetting

Page 33

Using Radio Keypads and Remote

Controls.

Using a Radio Keypad

Setting

Secure all your windows and doors. Make sure the system is in

standby, and that you can hear the warning tones from the

sounders.

1. Key in a valid access code.

2. Press either A, B, C or D to set the portion of system that

you require.

(If you wish to stop setting while the exit tone sounds, then

press .)

The left hand LED glows to show that the keypad is

transmitting.

3. Complete setting using the method programmed by the

Installer (see “3. Finishing Setting” on page 26).

Unsetting

1. Enter by the designated entry door.

2. Key in a valid access code.

3. Press .

Silencing an Alarm

1. Key in a valid access code.

2. Press .

Using a Proximity Tag With a Radio Keypad

If you wish to use a Proximity Tag with the radio keypad in place

of an access code, then hold the tag up against the proximity tag

sensor (see Figure 7).

The keypad glows blue and gives a “click” to show that it has

recognised the tag.

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 121 122

No comments

Cooper Security i-on160EX User Manual Page 39