Cooper Security 9651 Installation Manual Page 17

  • Download
  • Add to my manuals
  • Print
  • Page
    / 88
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 16
9651 3. Installation
11772232 Page 13
Fitting the System
Fitting the Control Unit Case
1. Remove the control unit case from its packaging.
2. Remove the front screws and slide off the case lid.
3. The upper part of the case back has a central keyway. Mark and drill a
hole for the keyway. Temporarily fix the case back to the wall. Mark the
position of two more fixing holes, remove the case back and drill the
holes.
4. Refit the case back to the wall using screws no less than 30mm x No 8,
with dome or pan heads.
Fitting a 9940 Keypad
Figure 4 shows the backplate and the position of mounting holes.
3
4
Figure 4. Backplate of the 9940 Keypad
1. Cable entry. 3. Back tamper aperture.
2. Fixing holes. 4. Sounder aperture.
Use No 8 or 6 screws (M4/M3.5) to mount the keypad.
When mounting the front of the keypad (containing the keypad pcb) onto the
backplate make sure that the tamper switch operates.
Page view 16
1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 87 88

Comments to this Manuals

No comments