Cooper Security 9651 Installation Manual download pdf (Page 56)

Programming - Programming Commands 9651

Page 52 11772232

70: Level C Final Exit Operation

This command specifies how the system treats Final Exit zones during part

set C. If you select option 0 (the default), any Final Exit zones in Level C

continue to act as Final Exit zones during part set C. If you select option 1,

these zones act as Normal Alarm zones during part set C.

71: Level C Entry Route Operation

This command specifies how the system treats Entry Route zones during part

set C. If you select option 0 (the default), any Entry Route zones in Level C

continue to act as Entry Routes during part set C. If you select option 1, these

zones act as Final Exit zones during part set C.

72: Level C Exit Mode

This command sets the Exit Mode for Level C. The keypads give a double

"beep" confirmation tone at the end of all setting modes, including Silent Set.

The default is option 0, Timed.

Option

0 Timed. The keypad sounders and any internal sounders give a low

tone during exit of Level C. Use Command 75 to select the exit time.

1 Instant Set (no exit tone). Use this option to make the system set

without delay or exit tone.

2 Silent Set. Use this option to make the system set without an exit

tone. Use Command 75 to program the exit time.

3 Makes the Level C exit mode the same as Level A.

73: Level C Alarm Response

This command sets the Alarm Response for Level C.

Option

0 Keypad sounders only.

1 Internal sounders and keypad sounders (default).

2 Local alarm (internal and external sounder only).

3 Full alarm (communication and internal/external sounders).

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 87 88

No comments

Cooper Security 9651 Installation Manual Page 56