Cooper Security 9651 Installation Manual download pdf (Page 42)

Programming - Programming Commands 9651

Page 38 11772232

Value Type Description

14 Forbikobler

(FB)

This zone type is a Scandinavian type of Entry/Exit zone (the

word "forbikobler" means "bypass" in Danish). Use this type for

zones connected to standalone external keypads or access

controllers. If the zone is triggered by the external keypad during

the exit time, the control unit stops the exit time and sets the

system. If the zone is triggered while the system is set, the

control unit starts the entry time. Use zone attribute X7 to select

an entry timer for the zone (page 39) and Commands 201–4

(page 65) to set up the entry timers.

15 AC Fail (AC) This zone type is triggered by a failure in the AC input to an

external power supply. Command 134 defines whether a zone of

this type can be reset by a user or only by the installer.

Command 137 defines whether the user can override the fault to

set the system.

16 Low Battery

(LB)

This zone type is triggered by a low voltage in the battery in the

external power supply.

17 Battery Fault

(BF)

This zone type is triggered by a fault in the battery in the

external power supply.

18 Power Output

Failure (PF)

This zone type is triggered by a failure in the DC output to the

external power supply.

19 Fault (FL) This zone type triggers a fault condition, causing an alert and

preventing the system from being set. The tamper connection

operates in the same way as a normal alarm zone (type "NA").

Command 139 defines whether a zone of this type can be reset

by a user or only by the installer. Command 140 defines whether

the user can override the fault to set the system.

Zone Attributes

The following table shows the values available for zone attribute, depending

on the zone type. To set an attribute, key in the appropriate value. To unset

the attribute, key in the value again.

Value Attribute Valid for Description

Chime (C) Normal Alarm

(NA)

Final Exit (FE)

Entry Route

(ER)

Shock Analyser

(SA)

When enabled by the user, the system makes

a doorbell-like sound when any zones

programmed as "Chime" are opened. This

facility operates only while the system is

unset.

To make the Chime available from keypad

sounders but not internal sounders, use

Command 22 with option 0.

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 87 88

Comments to this Manuals

No comments

Cooper Security 9651 Installation Manual Page 42

Comments to this Manuals

Related products and manuals for Security access control systems Cooper Security 9651

Related products and manuals for Sensors Baumer OADM 20I2480/S14C