7510r Installation
Page 13
7. Fit Battery
Fit six AA 2100mAh NiMH batteries to the battery
compartment in the back of the control unit, see Figure
13.
Figure 13. Fitting Batteries
Make sure that you refit the battery compartment lid and
secure it with the screw provided.
8. Assemble and Close Control Unit
Hook the top of the control unit body over the top of the
wall plate.
Connect the ribbon cable from the control unit body to
the wall plate (see Figure 14).
Figure 14. Connect Ribbon Cable
Lower the control unit body onto the rest of the wall plate
and secure with the screws provided (see Figure 2).
Comments to this Manuals