Cooper Security Homelink 75 User's Guide download pdf (Page 27)

7510r Programming Reference - Outputs

Page 23

When a partition holding this zone is set the control

unit starts an intruder alarm if the detector is

activated. See page 73 for instructions on how to set

the Activity Time.

Part Set

When a user instructs the control unit to part set, the

control unit sets only those zones with the Part Set

attribute. If a user performs a “Part Set All” then the

control unit sets all zones in the system with the Part

Set attribute. If a user part sets a partition then the

control unit sets only those zones within the selected

partition that have the part set attribute.

Force Set

The user can set the system while a zone with this

attribute is open (active). The control unit omits the

zone for the duration of the setting/unsetting cycle.

(You must enable this feature in the System Options -

Force Set menu See page 44.)

Note: Some attributes are not available for certain zone

types. The display shows the available attributes.

Outputs

The control unit provides 34 outputs. The first two

outputs are hardwired outputs, see Figure 4 on page 4

and Figure 9 on page 11 for the position of their

connectors.

Outputs 3 to 34 are radio outputs. The control unit uses

these outputs to command one or more of the radio

output devices compatible with the 7510r.

You can program the control unit to group outputs into

different "types". For each type the control unit has a

different pattern of activating or deactivating the output.

The pattern depends on whether the control unit is set or

unset, and what input is coming from the detectors or the

keypad. For either hardwired or radio outputs see Edit

Outputs for instructions.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 83 84

No comments

Cooper Security Homelink 75 User's Guide Page 27