Cooper Security Homelink 75 User's Guide download pdf (Page 39)

7510r Programming Reference - Partitions

Page 35

4. Select the option you wish to use for the button.

5. The control unit assigns that function to the button

and gives a double beep. The display shows the list of

buttons again.

6. Repeat steps 3 to 5 to program the other buttons as

necessary.

Deleting an Arming Station

If you wish to remove an Arming Station from the

system:

1. Select

Other Devices – Arming Station - ADD/DEL Arming

Station.

2. Select the Arming Station that you wish to delete.

The display asks you to confirm that you wish to

delete the selected Arming Station.

3. Press YES.

The control unit deletes the Arming Station’s identity

and gives a double beep.

Partitions

The 7510r can provide up to four partitions. To program

partitions select Partitions followed by the partition you

wish to change.

Partition Name

You can assign a name up to 12 characters long to each

partition. Once you have assigned a name the control

unit displays the name while you are programming the

rest of the system.

Exit Mode

Each partition can have its own exit mode. The exit

modes available are:

Timed Set.

Use this option to make the partition set after a

delay. Use the Entry/Exit time menu (see page 36) to

choose the delay.

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 83 84

No comments

Cooper Security Homelink 75 User's Guide Page 39