Cooper Security Homelink 75 User's Guide download pdf (Page 50)

Programming Reference - System Options 7510r

Page 46

Alarm Confirmation

Note: This section of the manual describes the menus

available for programming the system to meet

DD243. For a description of how you may wish to

apply these menus see Appendix A.

In order to program your requirements for DD243 select

System Options, Alarm Confirmation

. The options available

are:

Confirmation Used

When set to ‘Yes’ this option enables the features

designed to ensure the system complies with

DD243:2004.

Note: When using Alarm Confirmation, and the system is

programmed for Installer reset after an alarm, the

user cannot set the system after an alarm until the

installer has carried out a reset.

Ext Sounder for

Unconfirmed: the control unit operates the external

sounder for all alarms (and overrides any Siren

Delay, see page 42).

Confirmed: the control unit operates the external

sounder for Confirmed alarms, but not for any other

types of alarm.

After Entry

Never: The control unit turns alarm confirmation off

if the user enters by the entry door (used for

DD243:2004 clauses 6.4.2 and 6.4.4).

2 zones: The control unit starts a confirmed alarm if

an intruder activates two (or more) zones after

entering the premises (used for DD243:2004 clauses

6.4.5).

Reset Unconf/Conf

This option works in conjunction with System Options -

User Access - Reset After Alarm

(see page 38) to

determine who can reset the system after a

confirmed or unconfirmed alarm. When programming

a control unit to meet BS8473:2006 first set System

Options - User Access - Reset After Alarm

to “N”. You may

then use the options below:

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 83 84

Comments to this Manuals

No comments

Cooper Security Homelink 75 User's Guide Page 50

Comments to this Manuals

Related products and manuals for Security access control systems Cooper Security Homelink 75