Cooper Security Homelink 75 User's Guide download pdf (Page 64)

Programming Reference - Reporting 7510r

Page 60

SIA Report Restorals

If you have selected a SIA report mode in Reporting,

Alarms

then you can enable or disable restoral reporting

by selecting Reporting, Alarms, SIA Report Restore. The

options available are:

Disabled

Restore off. The system does not communicate

restorals.

Enabled.

Restore on. The system will communicate restorals,

as long as the SIA report mode you have selected

permits it (see page 57).

Contact ID Reports

If you chose Contact ID in Reporting Type menu then

select

Reporting

Alarms

Contact ID Reports

to select the

types of contact ID messages that the control unit sends.

There are two options:

Basic

Comprises all the messages with numbers in the “CID

Code” column of Table 1, with the exception of those

marked with an “‡”.

Basic + Restore.

With this option the system sends all the messages

with numbers in the “CID Code” column of Table 1.

Force Test Call Now

Use this option to make the control unit start a test call

immediately.

Dynamic Test Call

In dynamic testing the system makes a test call 24 hours

after the last alarm communication. To enable dynamic

testing select Reporting, Alarms, Dynamic Test Call, Enabled.

Static Test Call

In static testing the system makes a test call either at

one particular time of day or on one day every month.

To make test calls at a set time every day select

Reporting, Alarms, Static Test Call, Daily. From the display

select a number between 01 and 24 to choose the time of

day for the call. For example, select 18 to program the

1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 83 84

Comments to this Manuals

No comments

Cooper Security Homelink 75 User's Guide Page 64

Comments to this Manuals

Related products and manuals for Security access control systems Cooper Security Homelink 75