Cooper Security Homelink 75 User's Guide download pdf (Page 46)

Programming Reference - System Options 7510r

Page 42

Auto Rearm

To change the number of times that the system will re-

arm when the siren time expires select:

System Options

Auto Rearm.

Select NEVER to make the system never re-arm (the

system will go into alarm once only). Select one of the

other options to make the system re-arm once, twice,

three, four or five times, or always. The system re-arms

all closed zones, but not detectors that are still sending

alarm signals.

If the system has rearmed, then when a user enters the

system through the entry route the control unit will give

an audible internal alarm in place of the normal entry

tone.

Siren Delay

To change the Siren Delay select

System Options

Siren

delay.

When the system is set and (for example) an intruder

violates a zone, then the control unit waits for the

programmed Siren Delay before operating the siren. The

control unit then operates the siren for the programmed

Siren Duration.

Note: The control unit ignores the Siren Delay setting if:

a) The Alarm Response Mode does not require

communications.

System Options - Alarm Confirmation - Ext Sounder For

is set to Unconf, see page 46.

Siren Time

To change the length of time that the system operates

the siren during an alarm select

System Options

Siren

Time

Note: The durations offered by the display apply to a

siren wired directly to the control unit.

The 750r radio siren has a fixed 90 second sounder

duration in an alarm. This duration is designed to

preserve the battery life of the radio siren.

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 83 84

Comments to this Manuals

No comments

Cooper Security Homelink 75 User's Guide Page 46

Comments to this Manuals

Related products and manuals for Security access control systems Cooper Security Homelink 75