Cooper Security Homelink 75 User's Guide download pdf (Page 21)

7510r Programming Reference - Detectors

Page 17

Detectors

Add/Del Detector

To use a radio zone the control unit must learn the

identity of the radio detector. To learn radio detectors

select

Detectors

Add/Del Detector.

If you want the control unit to select the first free zone

for you then select Auto Learn. Follow the instructions on

the display and trigger the tamper of the detector you

want the system to learn.

The control unit gives a confirmation tone when it learns

the detector successfully. The display shows the received

signal strength of the radio detector.

Carry on and trigger tampers for all the other detectors

that you wish the control unit to learn, OR press EDIT to

complete the zone details for individual detectors.

Press BACK when you have finished.

Alternatively, if you wish to allocate a detector to a

specific zone, use the u or n keys to highlight a free

zone and press Select. (The display shows a small icon

(

) next to zones that already have detectors.) Follow the

instructions on the display as described above.

Delete All

Use this option if you wish to remove all the radio

detectors from a control unit. Note that you cannot undo

this option. The control unit sets all radio zones to Not

Used, and erases the identities of all the radio

transmitters that it has learned.

Zone 01 to Zone 32

You can make the control unit learn the identity of

individual detectors into selected zones. If the control

unit already has a detector learned to a zone then the

display shows a small rectangle at the end of zone’s entry

on the display.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 83 84

No comments

Cooper Security Homelink 75 User's Guide Page 21