Cooper Security Homelink 75 User's Guide download pdf (Page 52)

Programming Reference - Downloading 7510r

Page 48

Note: If you leave this field blank then the control unit

will use DHCP (Dynamic Host Control Protocol) to

obtain an IP Address from a DHCP server.

IP Sub-Net Mask

If necessary, key in the sub-net mask, for example

“255.255.255.000”. This number has the same

format as the IP address.

Gateway IP Address

If necessary, key in the gateway IP address. This

number has the same format as the IP address.

IP Port Number

Key in the port number. This is the port that the

control unit “listens” on to hear the Downloader

attempting to connect over the Internet. The format

is a group of digits up to five digits long. The default

port is 23.

Note: Once you have entered the details described above,

you can see what IP address you have given the

control unit by selecting the About Panel - About Comms

- IP Address

option from the Installer menu.

Downloading

The control unit can communicate with Downloader

software running on a PC. Downloader connects with the

control unit either over a telephone line or directly via

cable through a USB (Universal Serial Bus) port. See

Figure 4 on page 4 for connection details.

While connected Downloader can inspect and/or change

the control unit’s programming configuration. If you do

not wish to change the configuration you can simply

monitor the state of the control unit and its zones from

the PC.

In order to use Downloader software you must program

following options:

Account Name

As part of ensuring the security of a connection,

Downloader must use an account name for each control

unit. While the control unit is in Installer Menu you can

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 83 84

No comments

Cooper Security Homelink 75 User's Guide Page 52