Cooper Security Homelink 75 User's Guide download pdf (Page 33)

7510r Programming Reference - Other Devices

Page 29

2. Select a used memory slot.

The display shows the message “Delete Ext Siren”.

3. Press SELECT to make the control unit “forget” the

siren ID learned into that memory slot.

The control unit forgets the siren’s identity, removes

the “

” icon from the end of the line, and gives a

double beep.

Info Module

The Info Module is an external display module that can

show the setting state of the system or one or more

partitions. You must teach the identity of the 7510r

control unit to each Info Module that you wish to use.

Adding an Info Module

1. Select

Other Devices – Info Module

2. Make sure the Info Module is in Learn Mode (consult

the 771r Installation Guide).

3. Select Teach Info Module.

The display shows the message “Ensure receiver is in

learn mode then press teach”.

4. Press TEACH on the 7510r control unit.

The Info Module beeps twice to confirm that it has

learned the identity of the control unit.

5. Press YES on the 7510r control unit.

Disabling Info Modules

If you physically remove an Info Module from the system

(for example, a user no longer requires one) then you

may wish to stop the control unit trying to update the

Info Module’s display. This will free some of the control

unit’s processing power, and speed up its response to

other peripherals. The Info Module menu provides the

Updates

option for this purpose.

1. Select Other Devices – Info Module - Updates.

The display shows the options Disabled and Enabled.

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 83 84

No comments

Cooper Security Homelink 75 User's Guide Page 33