Cooper Security M2000 User's Guide download pdf (Page 52)

Engineer Menu 1-4 Engineering Manual

002 – Switch 12 Volts

Activates when any ward is set; deactivates when any ward goes into alarm or its Entry

Delay timer (page 61) is running, or when all wards are unset. This output is normally used

as an input to latching detectors.

003 – Detector Reset

Deactivates for approximately 4 seconds when a user code is entered to set the first ward.

The output is used to reset latching detectors (smoke detectors, shock sensors, etc.).

004 – Walk Test

Activates when a walk test is carried out (User option 1-1-2; see the

Manager's Manual

);

deactivates when the walk test is finished.

005 – Alarm

Activates when any ward has a full alarm (page 22); deactivates when all such wards have

been reset.

006 – Panic Alarm (PA)

Activates when any PA Silent or PA Audible zone (page 23) triggers, or if a user code of

type Panic Code is used. The output deactivates when all such alarms have been reset.

007 – Fire Alarm

Activates when any Fire zone (page 23) triggers. The Unset Fire attribute (page 37)

determines whether the output activates only when the zone is set, or when the zone is

either set or unset. The output deactivates when all Fire alarms have been reset.

008 – System Set

Activates when any ward is set; deactivates when all wards are unset.

009 – System Full Set

Activates when all wards are set; deactivates when any ward is unset.

010 – System Open

Activates when the system is unset; deactivates when any part of the system is set.

011 – Confirmed

Activates when there is a confirmed alarm (page 89), and remains active until the system is

reset.

012 – Courtesy Light

Activates for the duration of the Courtesy Time (page 64) when any ward has the Entry

Delay timer (page 61) running, or if any keypad is operated.

013 – Engineer On Site

Activates when the engineer’s code is entered; deactivates when the engineer is logged

off.

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 179 180

No comments

Cooper Security M2000 User's Guide Page 52