Cooper Security M2000 User's Guide download pdf (Page 98)

Engineer Menu 1-9 Engineering Manual

Sndrs on Unconf – The control unit starts the internal sounders (including keypad

sounders) immediately after an unconfirmed alarm. This behaviour is also used if you have

selected Confirmation Off.

Sndrs on Confirm – The control unit activates the internal sounders after a confirmed

alarm and any programmed bell delay.

)

The sounders operate without a confirmed alarm if the Entry Delay timer (page 61)

has been started and has expired.

3 – Bells on Unconf / Bells on Confirm

These options are relevant only if you have selected Confirmation On.

Bells on Unconf (default) – The control unit activates the external bell output immediately

after an unconfirmed alarm. This behaviour is also used if you have selected Confirmation

Off.

Bells on Confirm – The control unit activates the external bell output after a confirmed

alarm and any programmed bell delay.

)

The external bell output operates without a confirmed alarm if the Entry Delay

timer (page 61) has been started and has expired.

)

Bells and strobes can be disabled for selected wards using the Bell & Strobe

attribute (page 37).

)

Refer to the Bell Delay and Bell Duration notes on page 61.

4 – After Entry Yes / After Entry No

These options are relevant only if you have selected Confirmation On.

After Entry No (default) – Choose this option if you want to prevent confirmed alarms from

occurring at all after the Entry Delay timer has expired.

Use this option to comply with

DD243:2002 paras 6.4.2, 6.4.3, 6.4.4 and 6.4.6.

After Entry Yes – Select this option if you want it to be possible for a confirmed alarm to

be generated once the Entry Delay timer (page 61) has expired. With this option selected,

if an intruder has started the Entry Delay timer (e.g. by breaking through the front door), a

confirmed alarm occurs only if either one or two further zones are triggered after the Entry

Delay timer expires. Only zone(s) that are not on the entry route are considered (i.e. zones

that have the Entry zone attribute are ignored).

Select the Confirm 2 Zones or Confirm 1 Zone option to choose whether one or two zone

activations are required after the Entry Delay timer (page 61) has expired.

5 – Ent KPD Lock Off / Ent KPD Lock On

These options are relevant only if you have selected Confirmation On.

Ent KPD Lock Off (default) – Users can unset the system from a keypad during the Entry

Delay time (page 61).

Ent KPD Lock On – Users cannot unset the system from a keypad during the Entry Delay

time (page 61).

Select this option if you are installing a system to comply with DD243:2002

paras 6.4.5 and 6.4.6. The user must unset the system with a proximity tag (“Portable ACE”)

or the Alarm Receiving Centre (ARC) unsets the system.

1 2 ... 93 94 95 96 97 98 99 100 101 102 103 ... 179 180

Comments to this Manuals

No comments

Cooper Security M2000 User's Guide Page 98

Comments to this Manuals

Related products and manuals for Security access control systems Cooper Security M2000